Flange juru

Flansi min be ni juru ye -min be weele fana ko flange ascrewed-be baara kɛ ni kɔnɔna juru dɔ ye (tapped bore) walisa ka ɲɔgɔn minɛ ni kɛnɛma tiyo juru ye, o be juru dɔ dilan min be se ka ɲɔgɔn minɛ ni degun ye min tɛ ni sɔgɔli ye. O b’a to a ka ɲi -bore yɔrɔ fitininw kama yɔrɔ minw na baara gwansanw be dan na, u ka kan ka don joona, wala u ka kan ka bɔ ɲɔgɔn na tuma o tuma.

A ka baarakɛcogo dɔw ye baarakɛyɔrɔw ye, minɛnw bɔli, nɛgɛjuruw wagati dɔɔni kɔnɔ, ani nɛgɛjuru minw ka dɔgɔ -ka taga -moderate. Octal Pipe be karbɔni nɛgɛ, nɛgɛ nɛgɛlaman, ani nɛgɛ nɛgɛlamanw dilan (o kɔrɔ,nɛgɛ nɛgɛlamanw nɛgɛlamanw) bonyaba la ani kilasi caman na, i n’a fɔ mɔgɔw be bonya minw fɛ i n’a fɔ2′′ jurula flangeand4′′ nɛgɛlamanw.

Yɔrɔ min na juru flansɛw ka fisa

• Soudure / funteni yamaruyali tɛ wajibiya
• Lajɛli teliman ni fɛnɲɛnamafagalanw ye (PTFE bandi walima anaerobiki)
• A ladonni n’a yɛlɛmani ka nɔgɔ
• Sugandili ɲuman ye tiyo galvanize walima coated ye yɔrɔ min na soudure man di

Dilancogo lasɔminiw (ɛnzeniyɛri ka hɔɔrɔnya)

• A man kan ka kɛ ni yɛrɛyɛrɛli jugu ye, doni min be mɔgɔ mandimi, walima thermocycling belebeleba
• A ka ca a la, a be dan ni fanga dɔgɔman ye ani yɔrɔ misɛnninw ye (Klasi 150/300 min ka ca)
• Sigi tilenninya be bɔ juru cogoya ɲuman na (NPT/BSP) ani juru min be se ka yɛlɛma

• Flange sariya:ASME B16.5 (Tuyo nɛgɛw ani nɛgɛw nɛgɛw)
• Juru sariyaw:

NPT (min yɛlɛmana): ASME/ANSI B1.20.1
BSPT (min yɛlɛmana): ISO 7-1 / EN 10226
BSPP (min be taga ɲɔgɔn fɛ): ISO 228-100.
Octal be juru sifa (NPT / BSPT / BSPP) yira ka gwɛ walisa ka yɔrɔw ɲagami ɲɔgɔn na ani ka jateminɛ kɛ sɛgɛsɛgɛri la baara la.

• Flansi min be ni juru ye (Flansi min be ni visi ye):Bore min be pɛrɛn tilennin na; min be di RF (ɲɛda kɔrɔtalen) wala FF (ɲɛda pɛtɛnin) kɔnɔ.
• Flange min be juru dɔgɔya:A be juru fitinin dɔ don nɛgɛdaga belebele dɔ kɔnɔ OD-be yɔrɔ mara ani nɛgɛdaga danfaranin (nɛgɛdaga dɔgɔyalan).
• Flange fiyentɔ min be digi:A fiyentɔ flange sɔgɔnin & tapped ni kɔnɔna juruw ye ka fiɲɛbɔyɔrɔw, jii bolisiraw, walima minanw ɲɔgɔndan (tapped blind flange).
• NPT ni BSP ka tagamasiɲɛw yira:
• NPT / BSPT (min be yɛlɛma):Tagamasiɲɛ fɔlɔ ka tɛmɛ juru donɲɔgɔnna fɛ; aw ka PTFE bandi wala jilaman dɔ ta.
• BSPP (min be taga ɲɔgɔn fɛ):Daminɛnw be ni gazi/O-gɛrɛn ye; a be kɛ yɔrɔ minw na a ka ɲi ka baara kɛ n’a ye tugun ani k’a ɲɛsin mɔgɔw ma.
• Ɲɛda suguw:

RF (min ka ca), FF (nɛgɛ wala fiyɛri minanw kama), RTJ ni baara kɛrɛnkɛrɛnninw ɲinina.

• Mɔgɔw ​​ka bonya:2′′ juru flange ani 4′′ juru flange be to ka mara yiriw ka baarakɛyɔrɔw ani skid kama.
• Minɛn kɛrɛnkɛrɛnninw:PVC juru be sɔrɔ nɛgɛ fitininw kama, minw tɛ nɛgɛ ye (dilanbaga ka sariya; ASME B16.5 nɛgɛ tɛ).

• Bonya hakɛ:1⁄2′′ – 24′′ (DN15–DN600); yɔrɔ fitinin min ka dɔgɔ ni 4′′ ye wala a ka ca a la
• Degun kalanw:Kalasi 150, 300 (kalasibaw i n’a fɔ 600 n’u y’o ɲini, u ka ɲi ka baara lajɛ)
• A ɲɛda:RF, FF, RTJ (a be se ka kɛ dan na ni juru ye sabu a be jateminɛ kɛ degun kan)

• Karbɔni Nɛgɛ:ASTM A105 (lamini), A350 LF2 (funteni dɔgɔman), A694 F52–F70 (sɛnɛfɛnba min be sɔrɔ tiyo baara la)
• Nɛgɛ min tɛ yɛlɛma (Nɛgɛ min tɛ yɛlɛma):ASTM A182 F304/F304L, F316/F316L, F321, F347
• Alloy & Sanfɛ-Temperature:ASTM A182 F11, F22, F91 (kɔrɔmu{4}}moli ka funteni yɛlɛma)
• Duplex ani Super Duplex:ASTM A182 F51 (2205), F53 (2507), F55 ka baara kɛ ni kulori ye ani kɔgɔjida la
• -nɛgɛ sugandi:PVC juru nɛgɛlaman min be kɛ ni fanga dɔgɔman ye, jii walima kemikalifɛnw (min tɛ -ASME nɛgɛ ye)

Koroziyɔn latanga / banni

• CS: tulu finman, zɛnki-minɛnin, min be ni galvanize ye, FBE min be ɲini
• SS: a ka mugu & a ka pasi; EP min be se ka kɛ baara saniyanin kama
• PTFE / nɛgɛdaga minw be se ka kɛ fɛn kɛrɛnkɛrɛnninw ye minw be se ka nɔgɔ bɔ

• Weld-labɛnni sigili gwansan:Octal Pipe threaded flanges be dilan ka bolow don ɲɔgɔn na, o be baara gwansanw ban ani ka yɔrɔ farati ni baara wagati dɔgɔya.
• Dɔnniya min ka dɔgɔ, min ka dɔgɔ -:A ka ɲi tuyo koridori gɛlɛnw kama, minanw bilayɔrɔw ani modɛli skid kama yɔrɔ minw na yɔrɔ man ca.
• Ladonni-dilancogo ɲuman:Flangew be se ka bɔ joona wala k’u yɛlɛma k’a sɔrɔ u ma tiyow tigɛ, o be baara tigɛli dɔgɔya.
• Minanw ni sariyaw be se ka yɛlɛma:A be sɔrɔ nɛgɛ karbɔni, nɛgɛ gwansan ani duplex sifaw la, minw be bɛn ni API, ASME, PED ani ISO ye ka ɲɛsin yiriw ka laɲinitaw ma.
• Flexible, poroze-dilanni bɛnnin:O baara be kɛ ka kɛɲɛ ni sannikɛlaw ka poroze wagatiw ye, o min b’a to u be se ka nɛgɛw di wagati bɛnnin na, u bonya n’u ka kilasi tɛ kelen ye.
• Lakanali marali minanw:Flangew be nɔrɔ ni tulu ye min be nɔgɔ kɛlɛ, k’u datugu ni nɛgɛdaga ye ani k’u siri koɲuman walisa u ka se ka labɛn ka don u kɔnɔ.

• Forge & Furakɛli ni funteni ye:Blank forgées ni sumanw bolicogo kɔlɔsinin ye; nɔrɔmali/Q&T/fura min be yɛlɛma ka kɛɲɛ ni sɛrɛkili ye.
• Masini tigitigi:125–250 AARH; RTJ yɔrɔw ASME kelen kelen bɛɛ la).
• Juru sɛgɛsɛgɛli:100% jateminɛ ka taga ASME B1.20.1 (NPT) / ISO 7-1 / ISO 228 (BSPT/BSPP).
• NDT ani degun sɛgɛsɛgɛri:UT/MT/PT i n’a fɔ a fɔra cogo min na; hydro test be sɔrɔ lajɛnbaw ɲinini fɛ.
• Sɛbɛnw:MTRw (EN 10204 3.1/3.2), funteni sɛgɛsɛgɛli, mɔgɔ sabanan ka sɛgɛsɛgɛli (BV/SGS/TÜV) ka kɛɲɛ ni ɲinini ye.

• Nafaw: fiɲɛ, azote, funteni nɔfɛtagama, ji baara
• Minɛnw nɛgɛ-ups ani fitinin-bore baarakɛcogo siri-ins
• Kemikali dozi yɔrɔw ani wagati dɔɔni kɔnɔ
• Tasuma-ji bolofara nɔrɔli (ni kilasi/ɲɛda bɛnnin ni sisitɛmu ye)
• Dɔgɔman-funteni baara (LF2) ani nɔgɔ baara (316L, duplex)

• Dansiginin:ASME B16.5 (juru)
• Juruw:NPT, BSPT, BSPP
• Bonya:1⁄2′′ – 24′′ (2′′ & 4′′ juru nɛgɛw be to ka mara)
• Kalandenw:150 / 300 (600 ni mɔgɔw b’a ɲini)
• Ɲadaw:RF/FF/RTJ
• Suguyaw:Juru dantigɛlen, juru dɔgɔyali flange, flange fiyentɔ gosi
• Minɛnw:CS (A105/A350 LF2), SS (F304/F316), nɛgɛdaga, nɛgɛdaga fila; PVC juru flange min be kɛ ni fanga dɔgɔman ye min tɛ -nɛgɛ ye

1.Hakɛ, NPS, Degun Kilasi (misali la, 2′′, Kilasi 300)
2.Fɔrɔmu juru (NPT / BSPT / BSPP) ani bololafɛnw ni kɛrɛnkɛrɛnninw
3.Ɲɛda (RF / FF / RTJ) ani gazi sugu ni lɔnna
4.Minɛnw hakɛ (A105, LF2, F316L, F22, F51, n’a ɲɔgɔnnaw)
5.Sɛgɛsɛgɛli laɲiniw (NDT, ji, 3nan-bolo)
6.Ka ban/ka fani don (galvanizasiyɔn, pasivasiyɔn, FBE)
7.Any kɛrɛnkɛrɛnninw: juru dɔgɔyali flange, fiyentɔ flange gosi, pɛntiri kulɛri, tagamasiɲɛ, pake

Sɛrɛkiliw

 

CE sɛbɛ

ISO 9001 ka sɛbɛ

API Q1 sɛbɛ

ABS sɛbɛ

AP-5L sɛbɛ

API-5CT ka sɛbɛ

 

Tagasogow: flange juru, Sinuwaw ka juru dilanbagaw, feerekɛlaw, izini